EXAMPLE OPTION 1 OUTPUT

These are sample outputs of the many input possiblities with this program. The ratio between generators and load centers is variable and has been chosen to be 50 -50 as shown here. The program can produce many different values of interest.

Line	Item Description	A Losses	B Distance	C Subs & Lns	D All Trans	E One Mod
1	Load Center Busses
2	Samuel	0.511	52.650	35.516	38.016	12.999
3	Samuel1	0.128	13.162	18.879	21.379	3.250
4	William	0.422	129.513	41.439	43.939	8.751
5	Henry	0.000	0.000	1.667	4.167	0.000
6	Total Load Center	1.061	195.325	97.500	107.500	25.000
7	Generation Busses
8	Gen1	0.462	71.675	40.844	44.064	14.180
9	William	0.006	8.433	6.791	7.734	0.000
10	Henry	0.592	115.217	49.866	55.702	10.820
11	Total Generation	1.061	195.325	97.500	107.500	25.000
12	Total Value Applied	2.12 MW	390.65 miles	195.00x106	215.00x106	50.0

A) Losses are in megawatts;

B) The distances are exclusive use transmission circuit miles;

C) Subs & Lns are applying dollars in millions using only the substation and transmission line dollars;

D) All Trans includes all the transmission system except generation costs and are in millions.

E) One Mod is an example to add costs to one substation, George, and determine who shares the improvement costs.

---

The generator at Gen1 serves what load centers and uses which lines doing so?

Load Center Served	Total Load MW at	Gen1 MW supplied
200 SAMUEL	100.00	53.10
210 SAMUEL1	25.00	13.27
300 WILLIAM	150.00	35.75
Total		102.12

Lines Used		Total Line Flow	GEN1 caused Line Flow
100 GEORGE	200 SAMUEL 1	110.28	62.63
100 GEORGE	300 WILLIAM 1	34.77	19.75
100 GEORGE	300 WILLIAM 2	34.77	19.75
101 GEN1	100 GEORGE 1	102.12	102.12
200 SAMUEL	210 SAMUEL1 1	25.00	13.27
300 WILLIAM	200 SAMUEL 1	15.71	3.74

Note: Gen1 does not serve the entire load at any load center. Gen1 uses each transmission line differently as a percent of the total flow in that given line.

---

The load center at WILLIAM is served by which generators and uses which lines doing so?

Generators Served	Total Generator MW at	WILLIAM MW Used
101 GEN1	102.12	35.48
300 WILLIAM	50.00	45.26
400 HENRY	150.00	69.27
Total		150.00

Lines Used		Total Line Flow	WILLIAM caused Line Flow
100 GEORGE	101 GEN1 1	101.99	35.48
100 GEORGE	400 HENRY 1	77.82	27.07
300 WILLIAM	100 GEORGE 1	34.55	31.27
300 WILLIAM	100 GEORGE 2	34.55	31.27
300 WILLIAM	400 HENRY 1	46.62	42.20

Note: WILLIAM is served by many generators. WILLIAM uses each transmission line differently as a percent of the total flow in that given line.

---

EXAMPLE OPTION 4 OUTPUT

Who uses the line Between WILLIAM and SAMUEL?

The total flow in the WILLIAM and SAMUEL line is 15.7 MW. It can be assigned to:
Generators Use:
	101 GEN1	3.7
	300 WILLIAM	4.7
	400 HENRY	7.3
Totals		15.7
	-OR-
Load Centers Use:		Uses MW:
	200 SAMUEL	12.5
	210 SAMUEL 1	3.2
Totals		15.7